How to Install a Ghost Immobiliser
Ghost immobilisers are hidden security system that shields your vehicle from key cloning and hacking. It works by stopping the engine from running until a PIN code has been entered. This can be as long as 20 characters.
This extra layer of protection is not detectable by thieves who might not be expecting it. Some systems also have an app that allows owners to disarm the immobiliser in case they forget their PIN code or to use a service/valet mode.
Connecting to the vehicle's CAN bus
The Ghost 2 Immobiliser is an innovative security system that can be integrated into your vehicle's ECU offering a secure protection against thieves. It is extremely efficient and user-friendly and can be a valuable addition to your vehicle's security arsenal. But, as with any other anti-theft device, it is not foolproof and requires regular maintenance to ensure proper operation. Fortunately, this guide will aid you in getting the most benefit from the Ghost 2 Immobiliser.
CAN (Controller Area Network) is a robust serial networking that allows microcontrollers to communicate with each other over small distances. A central control unit is not required. It is designed to multiplex electrical wiring in vehicles, saving on copper. It offers many advantages including low cost and simple use.
The CAN protocol is utilized in a majority of modern cars to communicate with the engine management system, transmission controller, steering control module air conditioning controls and more. It also carries sensor information, such as speed sensors, as well as other inputs, to control the vehicle's various features. The CAN bus is able to monitor the status of these different components. It could stop the vehicle from starting if it is in an unsafe condition.
Although the CAN bus can be employed for a variety purposes, it's crucial to know how it functions and how it's secured. Using CAN bus can be an excellent method to enhance the features of your vehicle, but it's vital to protect it from hackers and other threats. Installing a firewall, and monitoring your CAN-bus with software is the best way to do this.
Ghost2's discreet control unit is concealed in the car's wiring harness or dashboard, removing the possibility of a burglar physically tampering with it. It's also impossible to reset the PIN or emergency code without access to the vehicle.
If you have to hand over your vehicle to a valet parking service, maintenance, or any other reason, you can activate the Transport Mode. This option disables the Ghost immobiliser's ignition and keyfob functions and will only reactivate when the car reaches 31 mph for a period of 15 minutes.
How do I create a PIN code
The Ghost immobiliser shields your vehicle from thieves. The revolutionary technology utilizes the PIN to disable the vehicle's engine and prevent it starting without the correct code, or a valid fob/mobile. ghost immobiliser 2 ensures that the system is unnoticeable and offers unparalleled protection against theft. Moreover the system is TASSA certified and can result in significant savings on car insurance premiums.
During installation, Ghost enters a "learning mode" to record the sequences of buttons that are pressed to create unique pin codes. The installer will guide you through activating the system after the pin code has been created. Once activated it will Ghost system will turn off your vehicle's starter motor until a valid pin code is entered or the vehicle is switched to transport mode. This makes it very difficult for thieves or cloners who want to hack or clone your vehicle's starter system.
It's easy to set up an easy-to-install Ghost immobiliser, however, you must follow the specific instructions in the user's manual to ensure the proper operation. Hand tools and multimeters can be used to check electrical values. Insulation tape as well as heat shrink tubing and cable ties are a good option to shield exposed wiring. Be certain to test the system regularly to identify any issues or potential mistakes.
It is important to check the system one final time prior to turning on the ignition. The Ghost immobiliser will re-arm itself after a period of 3-30 seconds, based on the car's model. It also has an option for Service/Valet that allows you to temporarily remove the system for servicing your vehicle or parking valet.
Ideally, the immobiliser should be placed in a discreet location beneath the steering wheel or dashboard. Make use of a small piece of tape or paint on the wires of the CAN H and CAN L to make them easier to find when you are testing. In addition, the CAN H and CAN L wires should be connected to a power source that provides continuous 12V. It is important to check the connections again after testing, as an the incorrect identification of these wires could cause the system malfunction.
The system must be activated
A ghost immobiliser stops the car from starting unless you press a number of buttons inside the vehicle, typically on the steering wheel or the door panel, or the central console. The sequence is determined by the user and can be changed if necessary. Once activated, the system cannot be removed. This makes it an ideal choice for anyone who wants to secure their vehicle from theft.
The system is not designed to be able to be detected by modern diagnostic tools and code-grabbing technologies. It also doesn't broadcast radio signals which makes it difficult for thieves to find the device.
If the device is detected, it will prevent the engine from running and sound a loud alarm to deter thieves. The device can be used to track a car's location and help police recover the vehicle in the event that it was stolen.
Contact Car Specalist Customs for a quote or to discuss your options in Ghost immobiliser. We are qualified to install ghost immobilisers on your vehicle. We will ensure that it is concealed in a place that is difficult to reach. We can also install additional security measures, including a kill switch or wheel lock to protect your vehicle from theft.
Disarming the System
If you own a Ghost immobiliser installed to your vehicle, it's essential to know how you can disable it. It can be used in the event you forget your keys or your car battery dies. The system utilizes a unique PIN code that only you know. It will not start the car without this code. The easiest way to enter the code is to press a series of buttons on your dashboard or steering wheel. This is much simpler than using a key fob and keeps others from copying the remote.
Ghost2 is not intrusive, unlike some aftermarket immobilisers that require cutting wires for installation. It also connects to the CAN bus system of your vehicle to operate. Its standout characteristic is its ability to bypass the engine without affecting the normal functions, making it hard for thieves to make use of signal boosters or copy your car keys. Moreover, it does not emit radio frequencies, so thieves can't detect the system.
The Ghost system comes with the option of a Transport Mode that allows you to temporarily disable security in situations such as transportation or service. This feature is great if you are lending your vehicle to someone else without sharing your PIN code or if your vehicle requires to be kept secure when you drive it. To activate Transport Mode, press the service button 5 times in a matter of 2 seconds. The Ghost system will confirm activation with 5 indication signals.
After you're done, make sure to save the emergency code in a secure place away from your vehicle. In the event that you encounter a situation where you are locked out of your vehicle, contact the technician or the company who installed the system, and they'll provide you with the code. If you are unable to reach them, you can always try contacting an authorized dealer but this would require verification procedures and may incur additional costs.
This system is not just convenient, but it can also safeguard your vehicle from theft, and also reduce the cost of insurance. Many insurance companies offer lower monthly premiums, or even financial incentives for installing this anti-theft technology.