The Ghost Immobiliser
Immobilisers can be an effective weapon in the fight against car theft. They prevent the car from being started without a key fob, and are effective in stopping hotwiring and traditional forms of vehicle theft. However, newer techniques like key cloning and relay theft are becoming more common.
The Ghost Immobiliser is designed to counter these new trends and make your car undetectable. It doesn't make use of LED indicators or radio signals or key fobs and is quiet and stealthy.
Easy to install
The Ghost Immobiliser is a revolutionary device, connects with the CAN data network of your vehicle to stop key cloning and theft. It is a TASSA-approved device and insurance companies have endorsed it. It is almost unnoticeable by thieves and operates silently. It uses buttons on your steering wheel and central console to create a unique pin-code sequence that you have to enter before you can start your car. You can create up to 20 different sequences for increased security. The system is easy to install and doesn't require any additional hardware.
To ensure the best possible results It is recommended that you use a reputable CAN-immobiliser installer who is skilled in your particular vehicle. Ideally, they'll have a workshop in your area where you can go to have your installation completed. They'll also have a variety of tools and materials to help you in the process of installing. They will have basic hand tools, a multimeter, and insulation tape, as well as heat shrink tubing to safeguard the connections. A user's manual will offer instructions specific to the wiring in your vehicle.
Connect the battery prior to beginning the installation to avoid short circuits or airbag deployment. It is essential to verify the location of the CAN H and CAN L wires, since the wrong identification could result in unintentional system integration. It is also a great idea to label or mark the wires. Finally, use a multimeter to verify that the power source you have identified provides a consistent 12V supply.
Advanced thieves may employ various tactics to bypass Ghost Immobilisers, such as blocking or spoofing. These methods are based on amplifying the signal that is sent from your key fob to the vehicle's electronic control unit. With advanced anti-jamming technologies and constant monitoring, your vehicle can be protected from these sophisticated attacks.
Security enhancing
Ghost immobilisers are an extra layer to protect your car against theft. It is an PIN security system that you can enter by pressing buttons on the dashboard or steering wheel making it difficult for thieves to take your vehicle. The device is designed to be hidden within your vehicle. It doesn't have any lights, or other signals to alert burglars to its presence. It connects directly to the ECU of your vehicle via the data bus. This means that it is not susceptible to hacking or relay attacks.
The system is a valuable investment for those who own high-end vehicles, as they are at a greater risk of being stolen because of their value and the popularity. The enhanced features of the system protect your car from key duplicates and ECU swapping. Some ghost immobilisers are connected to apps, which means you can arm and disarm easily. They may have a service/valet setting that lets you temporarily disable the immobiliser while your vehicle is undergoing repairs or maintenance.
Ghost immobilisers have another excellent feature that is that it doesn't need any cutting of wire. This is a good feature, especially if you are driving a car that does not have any immobiliser built-in technology. Certain systems also work with GPS tracking devices, adding additional security to your vehicle. A GPS tracker can aid in reducing your insurance premiums. If you opt to purchase a ghost immobiliser be sure it is TASSA verified and that a professional installer will install it for you.
Compatible with all major brands and models
The Ghost Immobiliser was made to work with all major vehicle models and makes, protecting your prized possessions from theft. It generates a unique pin code using buttons on your steering wheel, console, or door panels. You must enter this code before you are able to drive. It is tamperproof and undetectable, and is backed by three-year guarantee. It is also fully endorsed by insurance companies. This means that you can reduce your cost of insurance.
The Ghost system differs from the normal immobilisers, which use the key fob for ignition control. It is directly connected to the engine controller via the CAN bus. This means that it is impervious to tampering, and is virtually impossible to remove or disable and is not stolen by organised car thief groups. The Ghost system can also be paired with an iPhone app to allow remote monitoring and management.
You can choose an PIN code that is simple to remember, but mathematically impossible for thieves to determine. ghost immobiliser car can modify and modify the PIN at any time to protect your vehicle even if it's situated in a parking area or on the street. You can also set a service or valet mode in case you require someone else to drive your car temporarily, for example when it's in garage for maintenance. This feature is also an excellent way to protect your vehicle from being stolen by a shady mechanic. To ensure your security you can choose a Ghost call alert which will notify you if your car is moving or if it has been moved.
Convenience
The ghost immobiliser guards your vehicle from theft methods such as key cloning or relay attacks. It works by connecting with the car's data network CAN and preventing communication with the engine ECU. This makes it impossible for thieves to clone or hack your vehicle, making the installation of this system a smart idea for any driver.
After installation, you'll need to enter a PIN number that is up to 20 digits using the buttons on your dashboard or steering wheel to start the engine. The system is completely concealed and inaccessible to thieves as it does not emit any radio frequency signals. It is also able to be programmed to change the PIN of the user, which further enhances its security. The system is designed to stop circuit-cutting, making it almost impossible to alter.
If you have a problem remembering your PIN, there are some systems that let you communicate with the immobiliser through an app on your phone, disarming it instantly. Some even have an option for service or valet that allows you to start your car temporarily, such as when you have to drop it off for servicing or valet parking.
The Ghost Immobiliser is also undetectable to thieves as it does not transmit radio signals, a major advantage over other aftermarket car security systems. Additionally, it is simple to use and does not require any wiring that is complicated. It can be used combination with dash cams to provide added security. Dash cam Thinkware F70 features clear and sharp 1080p HD footage, Format Free Technology, and parking mode. The system can also be hardwired for optimal performance and longevity.
Installation
It is crucial to select the most effective immobiliser ghost to shield your vehicle from thieves. This device will prevent car thefts by preventing communication between key fobs and the engine controller unit. This device blocks thieves from intercepting and cloning the signal used to start your vehicle. It can also detect the presence of a tamper and alert the vehicle owner.
The device is easy to install and can be integrated with your vehicle's existing systems. It does not require any modifications to the wiring of the vehicle and can be positioned in a hidden place such as under the dashboard. Follow the directions in the manual to ensure that the device is installed correctly. It is also crucial to test the system after installing it. This will ensure the ghost of the immobiliser works as it should.
You can purchase an Autowatch Ghost 2 Immobiliser from an approved installer and get it installed in your vehicle. The installer will connect Ghost to your vehicle's CAN Bus system, making it difficult for thieves to steal the system or bypass it. The installation process typically takes between 2 and 3 hours.
It is recommended that you look up the wiring diagram of your vehicle during the installation process. This will help you identify the CAN High & the CAN Low wires needed to connect your Ghost to the engine of your vehicle. It is also crucial to double-check the connections to ensure that they are safe and well-insulated.
Once the installation has been completed, you can start using the Ghost Immobiliser as normal. It will turn off the ignition of your vehicle if it is not started with the correct PIN code which you can set yourself. The ghost of the immobiliser can be changed to Service/Valet Mode if you need your vehicle serviced or valet parked.